50W 100W 150W 200W DC Motor

50W 100W 150W 200W DC Motor

Solution Description:
 
DC motor is a rotating motor that can convert DC electric power into mechanical vitality (DC motor) or mechanical strength into DC electric energy (DC generator). It is a motor that can change DC and mechanical strength into 1 yet another. When it runs as a motor, it is a direct existing motor, which converts electrical strength into mechanical energy when it runs as a generator, it is a direct recent generator, which converts mechanical power into electrical energy.
 

Merchandise Identify 50w 100w 150w 200w dc motor
Motor Type DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT machinery)
Composition composition The composition of DC motor ought to consist of two parts: stator and rotor. The static part of DC motor is called stator. The main purpose of stator is to produce magnetic subject, which is composed of foundation, major magnetic pole, commutation pole, conclude cap, bearing and brush unit. Managing element is named rotor, whose principal function is to make electromagnetic torque and inductive electromotive force. It is the hub of energy conversion of DC motor. So it is also generally named armature, which consists of rotor, armature core, armature winding, commutator and fan.
Model ZSN,ZTP,Z4,Z2
Running pace  Constant Pace /Low Pace /Modify Velocity /Higher Speed Other 
Principal classification DC Motor is a equipment that converts mechanical strength into DC electricity. It is primarily employed as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation electrical power source of alternator. Although in places in which DC power is essential, AC energy rectifier is also utilized to transform AC into DC energy, but from some elements of performance, AC rectifier electricity source can not entirely replace DC generator.  
Safety grade IP55
Thermal Course 155 (F)
Software DC motors are extensively utilized in tape recorders, video clip recorders, movie discs, electrical shavers, hair dryers, electronic watches, toys and so on.
Servicing strategy Skilled motor routine maintenance centre motor routine maintenance procedure: cleaning stator and rotor – changing carbon brush or other parts – vacuum F stress dipping paint – drying – Calibration balance.
1. Use setting need to be constantly dry, motor surface area must be held clear, air intake ought to not be hindered by dust, fibers and other hurdles.
2. When the thermal security of the motor proceeds to run, it ought to be ascertained regardless of whether the fault arrives from the motor or the overload or the placing worth of the protecting unit is too low. Right after eliminating the fault, it can be place into operation.
three, make certain that the motor is properly lubricated for the duration of procedure. The common motor operates for about 5000 several hours, that is to say, lubricating grease should be included or changed. When bearing overheating or lubricating deterioration is located in procedure, the hydraulic force must adjust lubricating grease in time. When changing grease, the outdated grease need to be eliminated, and the oil groove of bearing and bearing cover ought to be washed with gasoline. Then ZL-3 lithium grease need to be loaded with 1/two (two poles) and two/three (4 poles, six poles and 8 poles) of the cavity between the interior and outer rings of the bearing.
four. When the daily life of the bearing is above, the vibration and sound of the motor will boost clearly. When the radial clearance of the bearing reaches the pursuing value, the bearing need to be changed.
five, when eliminating the motor, it is Ok to eliminate the rotor from the shaft extension or the non extension end. If it is not necessary to unload the fan, it is far more handy to just take out the rotor from the non-axle extension stop. When pulling out the rotor from the stator, the stator winding or insulation ought to be prevented from being damaged.
6. When changing the windings, the sort, measurement, turns and gauges of the unique windings should be recorded. When these knowledge are dropped, they ought to be obtained from the producer and the authentic designed windings ought to be changed at will, which usually deteriorates one or numerous overall performance of the motor or even can make it not possible to use them.

 

 

50W 100W 150W 200W DC Motor