Design Quantity: SLIDER-ev10
Type: Induction Motor
Frequency: 50/60HZ
Section: Three-section
Defend Feature: Watertight IP56 and so on
AC Voltage: 48V/60V/72V/96V/etc
Efficiency: IE 2
Certification: CCC, ce, Customer’s wants
Software: AC Asynchronous Induction Motor
Input voltage: 48V,and other
Rated Electrical power: 4KW
Max output Frequency: 300HZ
Max output electrical power: 10KW
Rated output existing: 98A
Cooling strategy: Organic cooling/Air cooling
Handle approach: Vector management
Product name: Automobile Wholesale Powerful Electrical Conversion Kit AC Motor
Packaging Specifics: Carton box(the picket packing will be pleased.)Solution: CE Certification and Auto Use EV motor Electric Automobile Conversion Kit
Port: HangZhou Port or the other port as your requirements
CE Certification and Vehicle Usage EV motor Electric Automobile Conversion Package
Our items:1. AC driving method (1kw-20kw): AC motor and controller2. Transmission assembly: rear axle, entrance stay shaft, reducer and rear/entrance drive assembly3. Energy provide system: battery charger and Lithium battery4. Other factors: DC-DC converter, dashboard, pedal, encoder and brake
Electric powered motor:
Motor controller:
Rear axle:
Other accessories of the travel technique:
Battery Charger Acceleration pedal DC Converter
Lithium battery:
Use the BMS manage approach,it would be communicated by the CAN,much more basic safety & far more effective.For fixing the beginning difficulty in cold area,the charger would be created with the heating purpose.
The share of battery charging could be created according customer’s ask for.
Pedal:
Patented design with great substance,stamina take a look at to promise all pedals would be good ahead of sending out to the consumer,on-time supply promised by robust creating capability
DC converter:
Isolated dc-dc electrical power converter is specially created for energy provide of vehicle lamp and audio in electric car, Brushed DC Motor 12V 1KW 3300RPM for Boat Windlass electric powered winch Hydraulic energy unit electric forklift, electric golfing car, electric touring car and other electric powered programs.Simply because of the built-in relay, it avoids arcing when the motor vehicle is turned on or off with the key.
Other accessories,like Charger and so on,can also be equipped by us.
Assured quality:—- A full established of processing products
—- Innovative computerized wire embedding system
—- Semi-automatic manufacturing line.
Making Atmosphere
A lot more Certifications:
Packaging & Shipping and delivery Packaging: Regular package deal is carton box.It can be picked with the wood packing if you need to have.If to european international locations,the wood box will be fumigated.If container is way too large,we will use PE movie for packing or pack it according to consumers unique request.
Shipping Detail: 7 to 15 workdays(pls check out the time with us.)Shipping and delivery Strategy: samples will be delivered by categorical & quantity goods will be sent by air or ocean.
Ensured top quality:
Just before sending out to our buyers,all goods will be ensured with well high quality.For getting the direct really feel,in your comfort,pls place some time to us to get a view with our manufacturing unit.
Our ServicesWhat will you get from us?
1. high quality goods,made by a 15-year expert manufacture of electric powered motor vehicle driving system2.total after-sale provider:as a top supplier from China & prolong the marketplace share in abroad.3.superb functionality: extensively employed in medium & 550 555Micro DC motor Massager Home appliances double ball motor energy device motor lower-pace electrical vehicle,OEM is accessible right here & good quality will be certain.
4.any inquiry will be responded asap & the trademessage is on line all days.
If you need the essential specialized help, you can get a packed travel method or a systematic solutions from us,which includes assist of a variety of matching tests just before currently being mounted in automobile.
Firm Information HangZhou Slider Digital Technology Co.,Ltd was started in 2004, expert in electric automobile travel method and switching power source in substantial-tech producing industry.The main materials are electric powered automobile motor,motor controller, forklift controller, DC – DC converter, electrical car chargers, and switching power source,inverter, and many others. All products are extensively employed to a variety of of electrical vehicles,this kind of asautomobiles,golfing cart, 103.0mm Mini Vibrating Motor Coin Mobile Vibration Motor with Tailored PCB Micro Motor for Toys forklifts, economic electronic,and more.
As a strong innovation & building organization,SLIDER can fulfill all you personalized demands,these kinds of as making use of in electric boat.
FAQ
one)What’s your support & warranty?
one. Before installation,it will be detected to make certain it will be matched with your automobile.
2. The good quality will be confirmed & guarantee will be 1 year.
two)Do you supply the other components of the driver method?
Of course,the whole system can be equipped listed here & components will be welcome too.
three)What’s the MOQ?
Before quantity,you can get samples to test initial. Just 1 device is Ok.
4)How chilly can the climate get and have this controller still operate?You can see use temperature in specification.
It is made by smart control core,then the failure in functioning point out will be prevented & the protected driving will be ensured.
5)How do you ship the goods and how extended does it get to arrive?Sample can be transported by DHL, UPS, Push Shaft For JAC J3 VVT FedEx or TNT & it generally takes 3-5 workdays to get there. Manufacturing get will be sent out by CZPT or air.transport method will be met to customers.
Thank you for your browsing & you can send out an inquiry to get the better service from us.
What Is a Gear Motor?
A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.
Inertial load
Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.
Applications
There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.
Size
The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.
Cost
A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.
Maintenance
Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.
editor by czh 2023-02-17