China Professional CZPT 4700390316, CZPT 390316 Hydraulic Motor 4700377294 with high quality

Product Description

Bonfiglioli  Bonfiglioli speed reducer   715C3B 716C3B 717C3B 718C3B  713C3B CZPT Planetary Gear  710C3 709C3
GM06 GM09 GM21 GM35 GM38 GM60 Excavator Final Drive sany  FOR xcmg  zoomlion Original, replacement and aftermarket Dynapac 47

 

Part Applications: DYNAPAC CC9 – DYNAPAC

Description: HYDR MOTOR

 

Condition: New

Unit Price: $ 1,040.61

BN 205 0571 Excavator Parts Final Drive Reduction Gearbox Carrier Planetary Gear For CZPT ZX2 14608847 TRAVEL REDUCTION GEAR BOX 
For CZPT Final Drive

For CZPT Travel Device

For CZPT Traveling Motor

For CZPT Traveling Reduction Gear

For CZPT Swing Device

For CZPT Swing Motor

For CZPT Swing Reduction Gear

For CZPT Main Pump & Pump Parts

For CZPT Axle & Transmission Parts

For CZPT Main Control Valve

For CZPT Joystick and Pedal Valve

For CZPT Center Joint

For CZPT Cylinder
Bonfiglioli  winch reducer 716  718  717C3H10A131J9H-145U26

Two light-duty tandem vibratory rollers 
Dual Drum Vibratory Roller 

Cummins engine 

Type XD111 XD121 XD131
Working mass(kg) 11230 12300 13080
Mass distributed on front drum(kg) 5670 6210 6540
Mass distributed on rear drum(kg) 5560 6090 6540
Static linear load on front drum(N/cm) 292 286 301
Static linear load on rear drum(N/cm) 287 280 301
Speed range(km/h) 0-10 0-10 0-10
Theoretical gradeability(%) 30 30 30
Min. inner/outer turning radius(mm) 4000/5900 3870/6000 3870/6000
Crab-walking distance (mm) 200 200 200
Min. ground clearance(mm) 420 420 420
Wheel base (mm) 4000 4000 4000
Steering angle(±) 46 46 46
Swinging angle(±) 12 12 12
Vibrating frequency(HZ) 30-48 30-45 30-45
Nominal amplitude(mm) 0.41/0.8 0.41/0.8 0.4/0.72
Centrifugal force(kn) 66/133 70/140 82/150
Model and manufacturer COMMINS 483.9
Rated rotating speed(t/min) 2200 2200 2200
Rated Power(KW)93 93 93 93
Rated oil wear (g. kw/h)229 229 229 229
Water tank capacity(L) 2*450 2*450 2*450
Fuel tank capacity(L) 200 220 220

  

Cheapest Price Hydraulic Single Drum Vibratory Compactor Xs142j in Philippines
XcHydraulic Single-Drum Vibratory Rollers Capacity 14 Tons Xs142j in Indonesia
Compacting Price Xm Single Drum Road Roller Xs142j
Brand New Xc 14t Single Drum Vibratory Road Roller Xs142j
12 Ton Hydraulic Tandem Vibratory Roller Compactor Xd122
Liugong 12 Ton Double Drum Road Roller Price Clg6212e
Xc18 Ton Road Roller Xs182j
Sdlg 14 Ton Vibratory Road Roller Compactor RS8140
2017 New Price CZPT Pneumatic Tire Road Roller Clg630r
14 Tons Double Drum Vibratory Roller Xd142
Hot Sale Road Compactor 10 Ton Tandem Vibratory Roller Xd102
3 Ton CZPT Popular Vibratory Mini Road Roller (Ltc203)
11 Ton Hydraulic Double Drum Road Roller Xd111e
12 Ton Hydraulic Double Drum Road Roller Xd121e
11300kg Double Drum Roller CZPT Xd111e
11 Tons Hydraulic Vibratory Double Drum Compactor Xd111e
Liugong Vibration Road Roller Capacity Clg614
Cheap Price Xihu (West Lake) Dis.n 16ton Road Roller Yz16-7 Sale
Xs202j 20 Ton Single Drum Vibratory Road Roller
11 Ton Vibratory Double Drum Road Roller Xd111e
Product Groups
Wheel Loader
Truck Crane
Excavator
Bulldozer
Motor Grader
Road Roller
Backhoe Loader
Heavy Truck
Crawler Crane
Tower crane
 

Shipping Cost:

Estimated freight per unit.



To be negotiated
Application: Motor
Function: Distribution Power
Layout: Three-Ring
Customization:
Available

|

Customized Request

Motor

What Is a Gear Motor?

A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.

Inertial load

Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.

Applications

There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.

Size

The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.
Motor

Cost

A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.
Motor

Maintenance

Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.

China Professional CZPT 4700390316, CZPT 390316 Hydraulic Motor 4700377294   with high qualityChina Professional CZPT 4700390316, CZPT 390316 Hydraulic Motor 4700377294   with high quality
editor by CX 2023-04-25