Coupling Grease

Why Coupling Grease?
Sufficient lubrication is important for satisfactory gear coupling operation. Gear Coupling Grease is particularly built for gear coupling applications to improve coupling daily life when dramatically minimizing upkeep time. Its large viscosity base oil and tackifier combine to maintain the grease in location and protect against separation and it can be in finish compliance with NSI/AGMA 9001-B97 lubrication suggestions.
Coupling Grease is dark brown in color and produced using a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to high centrifugal forces ordinarily observed in couplings. Bearing or general function greases are likely to separate and lose effectiveness because of substantial centrifugal forces over the a variety of components at substantial rotational speeds. These higher centrifugal forces encountered in couplings separate the base oil from your thickeners. Hefty thickeners, which have no lubrication characteristics, accumulate during the gear tooth mesh location leading to premature coupling failure. Gear Coupling Grease is designed to really resistant to centrifugal separation of your oil and thickener, which lets the lubricant to be used to get a rather lengthy period of time.
One of many strategies on the results of Gear Coupling Grease may be the variable consistency throughout the functioning cycle with the application. The consistency of our gear coupling grease alterations using the working disorders. Operating with the lubricant beneath actual support conditions causes the grease to become semi-fluid, functionally solash lubricating the wear surfaces of your coupling. Since the grease cools, it returns to your authentic consistency, therefore avoiding leakage.
Gear Coupling Grease is available from stock in 14 oz. cartridges, 1 lb. and 5 lb. cans.
Minimizing of coupling put on
Resistance to water washing
Corrosion and rust safety
Large load carrying capabilities
Extended relubrication frequency
Use at temperatures up to 325° F
Staying in place below high speeds
Resistance to centrifugal separation
Reduction in down time & maintenance cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and 1. This grease is specially formulated by using a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.