DC Motor Mechanical Digital System
57IC09/57IC22/57IC30 Features
one.Working voltage: DC enter voltage 15VDC to 50VDC,suggest functioning voltage 36V
2.The max continuous output recent is eight.2A, the max peak present is 13A (sophisticated overload capability of phase servo)
3.Employing FOC magnetic positioning handle technological innovation and room vector pulse width modulation (SVPWM) shut-loop control technologies
four.Utilizing sophisticated variable recent technology and frequency conversion technologies, efficiently reducing warmth and vibration of motor and driver
five.The quantity of pulses for every cycle (subdivision) can be set by the debug computer software or the dial change placing,the max subdivision no.is 51200.
six.The max pulse frequency of handle instruction is 500KHz (manufacturing unit default is 200KHz)
7.Pulse, path and permit signal enter interface stage is four.5 to 28V compatible
eight.Overall performance: sleek speed, little overshoot ,very good output power in medium and high velocity, little tracking mistake, low heat of motor and driver
Driver Design And Selection Xihu (West Lake) Dis.
| Motor Type | 57IC09 | 57IC22 | 57IC30 | 5731C10 | 5731C15 | |
| Holding Torque | 1.0N•M | 2.2N•M | 3.0N•M | 1.0N•M | 1.5N•M | |
| Vector Maximum Current | 6A | 6A | 8.0A | 5.6A | 5.6A | |
| Drive Control Scheme | Pure vector FOC control scheme, quick start and stop point(PM) control scheme, power angle control scheme |
|||||
| Step Angle / Motor Pole Pairs | 1.8°/50 pairs pole | one.2°/50 pairs pole | ||||
| CZPTmmended application | Operation smooth in low-velocity, and output strength is good in high-speed, low temperature rise, small vibration, excellent anti-interference ability and EMC effect |
|||||
| Operation voltage | fifteen-50Vdc,36Vdc recommend | |||||
| Overvoltage Protection Voltage | 68Vdc±2 | |||||
| Voltage control method | 32 bits DSP Vector closed – loop control technology | |||||
| Pulse Limit Frequency | 200KHz | |||||
| Protection | Overcurrent, overvoltage, undervoltage and tracking error tolerance alarm | |||||
| Input Signal | Pulse, direction and enable differential / single-ended interface signal, interface level four.5-28Vdc compatible, no need external current limiting resistor |
|||||
| Output Signal | Alarm / in-position signal OC output, the output capacity is100mA, need external pull-up resistor, the maximum pull up voltage is 24Vdc |
|||||
| Position Error Control Accuracy | ±1 Pulse | |||||
| Subdivision No. | Default 1600 / rev, through the DIP switch or debug software setting subdivision (200-51200) |
|||||
Dialing Swap Settings
| Pulse/Rev. | SW1 | SW2 | SW3 | SW4 |
| Default | ON | ON | ON | ON |
| 800 | OFF | ON | ON | ON |
| 1600 | ON | OFF | ON | ON |
| 3200 | OFF | OFF | ON | ON |
| 6400 | ON | ON | OFF | ON |
| 12800 | OFF | ON | OFF | ON |
| 25600 | ON | OFF | OFF | ON |
| 51200 | OFF | OFF | OFF | ON |
| one thousand | ON | ON | ON | OFF |
| 2000 | OFF | ON | ON | OFF |
| 4000 | ON | OFF | ON | OFF |
| 5000 | OFF | OFF | ON | OFF |
| 8000 | ON | ON | OFF | OFF |
| 10000 | OFF | ON | OFF | OFF |
| 20000 | ON | OFF | OFF | OFF |
| 40000 | OFF | OFF | OFF | OFF |
Notice : All above is usually utilized, and we can customize in accordance to your request or decide on the suitable design for you, remember to tell us subsequent parameters: existing, voltage, holding torque, human body length,the software area.
Application
Suitable for all kinds of little and medium-sized automation equipments and devices. This sort of as: laser products, healthcare equipment, 3D printer, modest and medium-sized engraving device, digital processing products, computerized crawling products, particular CNC machine tool, packaging equipment and robotic. It is particularly helpful for end users who assume minimal noise and high velocity applications.
Packaging and transport
1.Outer packing: CZPT export carton with required delivery marks
two.Inner packing: Watertight packing with shock absorbing EPE and cardboard surrounded
3.As per the consumers demands
Our service
one.Doing work time : 8:00 a.m – 10:00 p.m .Any questions, please tell us freely, we will be reply you asap.
2.Guide time : For samples, two to 5 days will be Alright. For mass production, the guide time rely on the portions you require.
three.Warrantity period of time : 18 months and Existence-prolonged servicing provider for the product.
four.We settle for products personalize.
FAQ
Q1: How to select the ideal stepper or servo motor?
A1: There are serveral crucial objects: size, duration, keeping torque, voltage, present and so forth.After verify them and advised us, we can pick the suited one particular for you.
Q2: Any other approaches to finalize the product?
A2: Confident, you can deliver us the model you are making use of, we can help you locate the appropriate one.
Q3:How to assure the High quality of CZPT Elements?
A3: We have the built-in system for industrial elements top quality management. We have IQC (incoming quality control), IPQCS (in approach high quality manage section), FQC (last good quality control) and OQC (out-going quality manage) to management every single process of industrial components prodution.
This fall:What is actually the Benefit of Your Elements for Market Products?
A4:1.The advantage of our items is the aggressive costs, quick shipping and delivery and high high quality. Our
staff are responsible-oriented, pleasant-oriented,and diligent-oriented. Our items are featured by strict tolerance, smooth complete and extended provider time.
2.Before we send out out the items,we check out them much more than 3 moments.
Get in touch with
