DK Detachable Teeth Sprockets

Any damage within the teeth surfaces of the sprocket diminishes the lifestyle in the conveyor chain.
With traditional sprockets, significantly worn sprocket teeth were repaired by teeth padding or even the total sprocket was replaced. In both situation, fix was expensive and with teeth padding, accuracy was impaired. We produced new sprockets with detachable teeth for independent substitute. This sprocket is highly rated by our prospects for your dramatic cost savings in price and time.
The teeth could be replaced by two procedures: person tooth substitute or sectional teeth substitute.
The bolts and nuts applied for mounting the teeth on to your sprocket are spot-welded to avoid loosening.
The respective structures are illustrated over the correct.
The over photograph plus the major proper illustration display a sprocket for personal tooth substitute. Because the joint encounter between the replaced teeth and also the sprocket is formed in the exclusive arc, the bonding accuracy is higher along with the sprocket strength is enhanced. In addition, since the load acting within the mounting bolts is decreased, there is certainly significantly less chance of loosening. This sprocket building is patented.
You will discover two varieties of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are utilised for huge sprockets acquiring heavy loads and welded sheet steel hubs for other applications.