Flexible plastic equipment racks in 0.8 Mod (32DP) pitch. These racks can offer an easy to install rotational drive as high as approx 270 degrees for example on camera focus rings. They also offer an economical remedy where a sizable gear is necessary or an extended stretch (up to 2 metres) of linear motion is preferred. These racks are appropriate for our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER share racks are made for high precision linear motion applications. You can expect a large collection of racks ranging from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Ground Racks (MRGF – MRGFD) : Has the highest strength and precision in the EVER-POWER regular rack series. Bolt holes can be remachined as carburizing is definitely applied only within the tooth area. J Series items are also available.
Hardened Surface Racks (KRGF-H – KRGFD-H) : Warmth treated floor gears with high precision and strength has excellent cost-overall performance ratio. J Series products are also available.
Hardened Racks (KRF-H/KRFD-H) : That is a strong rack made of Chromoly steel, treated by carburizing. Has high-strength, high wear resistance, and enables downsizing of SR racks. J Series items are also available.
Hardened Racks (SRF-H/SRFD-H) : Steady Hardened racks with high strength, extended life span are affordable. J Series items are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Steel Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack has the same tooth height and face width sizes, smaller sized and reasonably priced compared to SRF Racks
Steel Racks (SR) : Low priced, large selections of modules and number of teeth. J Series items are also available.
Steel Racks w/ Machined Ends (SRF) : Low cost, large selections of modules and quantity of teeth. J Series products are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low priced, large choices of modules and number of tooth. J Series items are also available.
Stainless Steel Racks (SUR•SURF•SURFD) : Ideal for food machinery due to SUS304 materials\’s rust-resistant quality.
Plastic Racks (DRF/DRFD/DRFK) : Plastic racks with small dimensional change, absorb lesser water than MC Nylon racks. J Series products are also available.
Plastic Racks (PR•PRF) : Made form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Little pitch racks made of free-slicing brass, excellent workability and high rust resistance.
Steel Circular Racks (SRO – SROS) : Convenient in applications where in fact the rack gets the reciprocal motion. S Type is easy to install.
Stainless Steel Circular Racks (SURO) : Same dimensions as SRO racks, except in stainless. Make use of where rust-resistance is required.
Ground Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent items with high precision and power, and low noise and abrasion characteristics.
Steel Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration because of larger get in touch with ratio of helical gears.
Molded Versatile Racks (DR) : Used in applications due to its flexibility, where metal racks do no have this attribute. Pinions and add-ons are also available.
Molded Flexible Rack Clamps (SRS) : Used to secure Molded Flexible Racks.
Molded Versatile Rack Pinions (SSDR) : Spur pinions used for molded flexible racks.
Flexible Rack Guidebook Rails (ARL) : Guideline Rails for Molder Flexible Racks.
We offer as standard a wide variety of Racks in Metric and Imperial sizes. Spur Racks are available in Steel (En8) or more to 2 metres long. Stainless Steel and Delrin (Plastic) Racks are created with Spur and Helical tooth forms, square and round sections up to 400mm in length. Alternative materials are available on demand. Moulded Hostaform Racks are available to offer an economical alternative where less torque is required.
Variable stiffness can improve the capacity for human-robot interacting. Predicated on the mechanism of a versatile rack and equipment, a rotational joint actuator called vsaFGR is proposed to regulate the joint stiffness. The versatile gear rack can be regarded as a combination of a non-linear elastic component and a linear adjusting mechanism, providing advantages of compactness. The joint stiffness can be in the number of 217-3527 N.m/rad, in fact it is inversely proportional to the 4th-purchase of the gear displacement, and nearly independent from the joint angular deflection, providing benefits of quick stiffness regulation in a brief displacement of 20 mm. The apparatus displacement with respect to the flexible equipment rack is perpendicular to the joint loading power, so the power required for stiffness regulating is really as low as 14.4 W, providing advantages of energy saving. The high compactness, great stiffness range and low power cost of vsaFGR are proved by simulations and experiments.
Flexible plastic gear racks in 0.8 Mod (32DP) pitch. These racks can offer an easy to set up rotational drive as high as approx 270 degrees for instance on camera focus bands. They also provide an economical answer where a big gear is necessary or a longer stretch (up to 2 metres) of linear motion is preferred. These racks are appropriate for our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER share racks are made for high precision linear movement applications. You can expect a large selection of racks which range from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Surface Racks (MRGF – MRGFD) : Gets the highest power and precision in the EVER-POWER regular rack series. Bolt holes could be remachined as carburizing is certainly applied only within the tooth region. J Series items are also available.
Hardened Floor Racks (KRGF-H – KRGFD-H) : Heat treated surface gears with high precision and strength has excellent cost-overall performance ratio. J Series items are also available.
Hardened Racks (KRF-H/KRFD-H) : This is a solid rack made of Chromoly steel, treated by carburizing. Has high-power, high wear level of resistance, and allows downsizing of SR racks. J Series items are also available.
Hardened Racks (SRF-H/SRFD-H) : Steady Hardened racks with high power, long life span are affordable. J Series products are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Steel Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack has the same tooth height and face width sizes, smaller sized and reasonably priced in comparison to SRF Racks
Steel Racks (SR) : Low cost, large selections of modules and quantity of tooth. J Series products are also available.
Steel Racks w/ Machined Ends (SRF) : Low priced, large selections of modules and quantity of tooth. J Series products are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low priced, large choices of modules and amount of the teeth. J Series items are also available.
STAINLESS Racks (SUR•SURF•SURFD) : Ideal for food machinery because of SUS304 material\’s rust-resistant quality.
Plastic-type Racks (DRF/DRFD/DRFK) : Plastic racks with small dimensional change, absorb lower water than MC Nylon racks. J Series items are also available.
Plastic-type material Racks (PR•PRF) : Produced form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Little pitch racks made of free-cutting brass, excellent workability and high rust resistance.
Steel Circular Racks (SRO – SROS) : Convenient in applications where in fact the rack has the reciprocal movement. S Type is simple to install.
Stainless Steel Round Racks (SURO) : Same dimensions as SRO racks, except in stainless steel. Make use of where rust-resistance is necessary.
Surface Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent products with high precision and power, and low noise and abrasion characteristics.
Steel Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration because of larger get in touch with ratio of helical gears.
Molded Versatile Racks (DR) : Found in applications because of its flexibility, where metal racks do no possess this attribute. Pinions and components are also available.
Molded Versatile Rack Clamps (SRS) : Used to secure Molded Flexible Racks.
Molded Versatile Rack Pinions (SSDR) : Spur pinions utilized for molded flexible racks.
Flexible Rack Guideline Rails (ARL) : Guideline Rails for Molder Flexible Racks.
You can expect as standard an array of Racks in Metric and Imperial sizes. Spur Racks are available in Steel (En8) and up to 2 metres in length. STAINLESS and Delrin (Plastic-type material) Racks are produced with Spur and Helical tooth forms, square and round sections up to 400mm in length. Alternative materials are available on ask for. Moulded Hostaform Racks can be found to offer an economical alternative where less torque is required.
Variable stiffness can improve the capability of human-robot interacting. Based on the mechanism of a versatile rack and equipment, a rotational joint actuator named vsaFGR can be proposed to modify the joint stiffness. The versatile gear rack can be regarded as a combination of a non-linear elastic element and a linear adjusting system, providing advantages of compactness. The joint stiffness can be in the range of 217-3527 N.m/rad, and it is inversely proportional to the 4th-order of the apparatus displacement, and nearly independent from the joint angular deflection, providing benefits of quick stiffness regulation in a short displacement of 20 mm. The gear displacement with respect to the flexible gear rack can be perpendicular to the joint loading power, so the power required for stiffness regulating is as low as 14.4 W, providing advantages of energy saving. The high compactness, great stiffness range and low power price of vsaFGR are proved by simulations and experiments.