Due to their style and from being combined with a helical equipment stage, the helical-worm gearmotors S..DR.. have particularly high efficiency. They are also extremely low-noise and thus avoid high noise emission levels.
Low-noise continuous operation: gear unit combination optimized with respect to efficiency
Do you anticipate a drive remedy to impress you with its high level of overall performance and efficiency? If so, we’d recommend our high-quality helical-worm gearmotors EP to you. These can be implemented separately in the modular system. In this manner, they offer you an enormous range of sizes, gear ratios and engine sizes.
However, their greatest power is certainly their running smoothness and their extremely low noise development. One thing is certain – With the helical-worm gearmotors EP you opting for a powerful drive solution which you will hardly also hear.
The overall concept also offers you many more practical product characteristics and benefits. Included in these are the significantly higher effectiveness of the helical-worm combinations instead of single helical-worm gear products. This is one way you save extra energy in the operation of your systems and are in a position to noticeably reduce ongoing operating costs.
You will receive the low-noise helical-worm gearmotors EP. – to suit your person requirements – with a wide selection of AC motors. Furthermore, you can freely configure all the relevant properties. In this way, you can effectively make use of all the benefits offered by this mixture of low-noise helical-worm equipment unit and performance-optimized engine. Even greater variance can be achieved because of the optional flange or foot-mounted style and by selecting between solid and hollow shaft.
Save time and money
By opting for among our gearmotors, you already are saving money and time with this selection and project planning. The reason being our modular system enables a multitude of combination options for gear products and motors. You can consequently reduce operating costs, depend on a long service life and reap the benefits of simplified maintenance that is feature of our brand.
Helical-worm gear units
Helical-worm combinations with considerably better efficiency than solitary helical-worm gear units
Very low-noise operation
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm equipment units of series EP
Combine the helical-worm equipment unit with our AC motors:
Quiet and dependable transmission of torque
High overload capacity
Hardened steel worm gear and bronze alloy worm wheel provide exceptional durability and long service life.
Optional durable bearings deliver high radial and axial load capacity
High strength cast iron casing (SK02050 – SK43125)
Lightweight, corrosion-resistant aluminum alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Solid and Hollow shaft (keyed, shrink disc ) Designs
Available in footed, shaft mount or flange mounted configurations
Right Angled gear units
High permitted overhung loads
Helical-worm Gearmotor S Series
Ever-Power helical-worm gear products are helical/helical-worm combinations, so they are better than normal helical-worm gear units. Due to their outstanding performance, these drives can be used in every industrial sector and tailored to individual torque and quickness requirements. The reduction ratios afforded by the helical-worm gear stage and the low noise levels during operation make these gearmotors ideal low-cost solutions for basic applications.
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Because of the unique mixture of optimized worm wheel material with unique lubricants, optimized form, this powerful electric motor achieves high levels of efficiency and torque. The casing machined on all sides enables diverse mounting options. Dual chamber shaft seals are utilized as standard.
The low contour design helps it be ideal for implementing applications e.g. in the food industry. The housing does not have any recesses, which simplifies cleaning – an especially essential feature for areas with stringent hygiene requirements.
Number of sizes:6
Power Range:0.12 – 7.5kW
Output torque range:50 – 1,300Nm
Ratio:3 – 3,400
Output option:output shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm, foot
Course 12 Helical and hardened and floor worm gears: Provides higher efficiencies and greater torque capacity in smaller sizes.
Multiple Input Options: Essential gear motors, inch or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Options: Hollow bores and shrink disks for shaft mounting, inch and metric output shafts, installation pilots and flanges offer an array of design solutions.
UNIBLOCK Housing: For maximum rigidity universal installation on five sides or via a torque arm.
Sealed for Washdown: Helps to keep contaminants and water out.
Worldwide Motor: Multiple leads and windings for worldwide multi volt/Hz requirements plus modular design to accept brakes, encoders or pressured cooling.
EP equipment motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right angle worm geared motors arranged new specifications for reliability, performance and economic climate with unparalleled features including hollow shafts in the smallest sizes. An inverter friendly design provides for easy integration today and a really future proof remedy. The EP gear motor offers total flexibility in mounting options includes shaft, base, face, and flange solutions. The motor terminal box could be mounted in choice positions rotated in 90º steps around the motor frame providing for unparalleled integration opportunities.
EP gear motors adhere to North American and International standards, including NEMA, IEC, CSA, and CE, the EP series allows for worldwide acceptance, a genuine total remedy for our global customers.
Excellent protection of IP65 acc. to IEC 529 assures you that the EP series is definitely dust tight and hose evidence,and can be used outdoors or in wet and dusty environments without the use of additional enclosures. Full rated output is available at the output shaft of the machine.
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Connection Standard with CAGE CLAMP®
Connecting with Connect connectors.
With built-in inverter up to 7,5kW.
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
Due to the unique combination of optimized worm wheel materials with unique lubricants and optimized shape, this powerful geared electric motor achieves high levels of effectiveness and torque. The reduced contour design helps it be ideal for implementing applications e.g. in the food industry. The housing does not have any recesses, which simplifies cleaning – an especially important feature for areas with stringent hygiene requirements.
Nominal torque: 50 – 1300 Nm
Rated power: 0.12 – 7.5 kW
Ratio: 3 – 3400
The 800BR contains a broad selection of compact, durable helical gear drives with extended life performance features and simplified maintenance. The usage of state of the artwork helical and worm equipment combinations affords optimum performance fulfilling a multitude of ratio requirements. The 800 BR is definitely functionally interchangeable with the majority of major manufacturer’s drives.
Double and triple reduction ratios from 8:1 to 900:1,
4 case sizes – 830, 840, 850, 860
All models shipped pre-lubed for your particular mounting position with KluberSYNTH UH1 6-460
Available in NEMA C-face flanged and direct input
Projecting and hollow result shafts
Output flange kits
Torque arm kits
Output shaft kits
Available in nontoxic white (BK) and stainless epoxy finish (SBK)
Available in hollow or projecting output shafts
Double and triple reduction ratios
Flanged or foot mounted
All devices adaptable to floor, sidewall or ceiling mounting
Helical worm geared motor
0,12 – 5,5 kW
4 – 996 Nm / 6 – 316 rpm
Stober MGS S helical worm geared motor
Efficient small right-angle geared motor. A favorably priced choice for the standard jobs anticipated of a right-angle drive.
5 gear sizes (S0 to S4).
Electric motor power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from we = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors available with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear device and AC electric motor are directly flange mounted, the helical worm gear motor pinion is on the engine shaft. This integrated compact design can be an essential element for the high precision and the extraordinary stiffness of EP geared motors.
For vector-controlled inverter operation use of an incremental encoder is provided for as standard.
Worm gearboxes and helical worm gearboxes / geared motors (S and SS)
The degree of efficiency in Ever-Power high performance worm gearboxes and helical worm gearboxes is a lot more than 90%. All worm shafts are manufactured from case hardened alloy steel and the flanks are precision ground. The worm tires are made from unique wear-resistant bronze. Helical worm gears are equipped with a helical gear. Worm gears with shrink disc, torque limiter, in addition to adjustable backlash designs are also component of our standard product range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Overall performance gearboxes in universal style. The housings are produced from top quality cast iron. The rugget walls and inner ribbing ensure extremely torsional stiff and sound dampening housings. The external ripping provides a rapid heat conducting.
Type S und SS
Optimised size/performance ratio
Designed for permanent procedure under rough circumstances
Above average lifespan
Housing produced from high quality grey cast iron with rugged walls and internal ribbing
Severe torsional resistance and low noise
Case hardened worm shafts and worms with precision floor flanks
Worm wheels created from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes built with helical gear wheel
Low engine speeds
Basic mounting, flange installation or universal design
Output shaft available since solid shaft or hollow shaft
Shrink disc, torque limiter,and also adjustable backlash
Second shaft end for fitting encoders or brakes
Free input shaft
ATEX specification according to directive 94/9/EG
helical worm gear motor