HK kind roller chains

Downsizing Your Procedure with Increased Electrical power Chains
HK form roller chains conform to H style of ANSI, and their thickness of inner and outer website link plates are equal to these with the following larger dimension chain. Hence, HK form roller chains are higher in tensile power by about 20%and in optimum allowable load by about 15% than these of standard roller chains. Because the weight of your chains can be larger, HK kind roller chains are ideal for that application of hefty duty at lower speed.
Advised makes use of
?Optimal for areas where larger power is required but significant and heavier chains are unable to be applied.
Selection of chains
Select a suitable HK kind roller chain depending on “Low-speed selection”
To the optimum allowable load, see the next table of dimensions.
HK type roller chains are available up to triplex.
Sprockets
Use normal sprockets to get a simplex HK roller chain Since the transverse pitches are greater than these of common chains within the case of duplex or triplex, typical sprockets are unable to be applied. Refer towards the sprocket tooth profiles for HK
Connecting link and offset link
The tensile strength of connecting hyperlinks and offset back links are listed over the left, however the highest allowable load is lower than that with the base chain. Please consult us ought to you’ve any questions. It truly is recommended to work with the connecting hyperlink of interference-fitted (FJ, HJ)
By no means make the holes of the connecting plate bigger and by no means make the pins thinner to facilitate the work for fitting the pins in to the connecting plate, considering that otherwise the fatigue strength will probably be lowered.
Selection of chains
Decide on a correct HK form roller chain dependant on “Low-speed selection”
For the greatest allowable load, see the following table of dimensions.
HK style roller chains are available as much as triplex.
Sprockets
Use regular sprockets for a simplex HK roller chain Since the transverse pitches are bigger than these of conventional chains within the situation of duplex or triplex, conventional sprockets are not able to be used. Refer to the sprocket tooth profiles for HK
Connecting hyperlink and offset website link
The tensile power of connecting back links and offset links are listed on the left, however the greatest allowable load is reduce than that with the base chain. Please consult us should really you may have any concerns. It truly is advisable to utilize the connecting hyperlink of interference-fitted (FJ, HJ)
By no means make the holes of the connecting plate bigger and hardly ever make the pins thinner to facilitate the work for fitting the pins into the connecting plate, given that otherwise the fatigue power is going to be lowered.