hydraulic planetary drive

Single and dual reduction planetary gear drives to be used with electric, hydraulic, air motors or mechanical power input from high swiftness, low torque sources to provide reduced speeds at increased torques. The input side has standard SAE pads for hydraulic planetary drive electric motor mounting. Available in the three result configurations shown below. Many units could be furnished with an integral parking brake.
Solitary reduction drives are limited by 3500 RPM input; double reduction drives to 5000 RPM. Units with essential parking input quickness is bound to 2500 RPM.The same torque comes in either direction of rotation. Torque rankings are intermittent. For constant operation reduce torque rankings to about 1/3 to 1/2 the values shown. Products provide 95% power transmission efficiency.

Wheel Drive
Input side has regular SAE pads and splined input. Output aspect has hub for mounting automobile wheel. Free wheel is possible by using the springtime disconnect to disengage the drive shaft. The disengage feature is regular on all wheel drives.

Shaft Output
Input side standard SAE pads with splined input. Output side choices include: Keyed circular, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is standard SAE pads with splined insight. Output side has a flanged spindle for coupling to the strain.

Swing Drives
Ever-Power model 6 is offered with or without integral parking brakes. The “SW” Power Wheel offers extra-large tapered roller bearings, a ductile iron hub and heat treated ring gear to reduce backlash growth caused by wear. The external bearing nut provides the greatest in shaft retention and shaft strength. Output can be a spindle shaft or different sizes of integral pinion gears.