China supplier Yej Series 5.5kw Three-Phase Asynchronous Motors for Braking AC Motors with DC Brakes with Best Sales

Product Description

Product Description

YEJ2 series electromatic-brake motors are improved products on the base of YEJ series. The technical properties of its motor conform to htere quirements of Y2 series. The performance of the brake assembly are improved. YEJ2 can make action proptly when the power of electric motor is off.

Motors of this series can continuously run at the rated power under the following conditions:
1. Altitude: Above sea level, not exceeding 1000m.
2. Ambient temperature: It varies with seasons but not exceeding +40° C
3. Voltage: 220/380V, 380/660V
4. Frequency: 50Hz, 60Hz.
5. Connection: Y-Connection for 3kw and below whereas; Delta-connection for 4 kw and above.
6. Duty: Continuous(S1)
7. Insulation Class: B, F
8. Protection: IP44, IP55 or IP54
 

Technical data-YEJ series motor-2 poles -380v/50HZ
type Rated output Full Load Static braking torque Max.braking time at No-load Brake power
Speed Input Current Efficiency PowTypeer factor
KW HP RPM Amp Eff.% P.F N.m S W
YEJ80M1-2 0.75 1.0  2825 1.81 75 0.84 7.5 0.20  50
YEJ80M2-2 1.1 1.5 2825 2.52 77 0.86 7.5 0.20  50
YEJ90S-2 1.5 2.0  2840 3.44 78 0.85 15 0.20  60
YEJ90L-2 2.2 3.0  2840 4.83 80.5 0.86 15 0.20  60
YEJ100L-2 3 4.0  2870 6.39 82 0.87 30 0.20  80
YEJ112M-2 4 5.5 2880 8.17 85.5 0.87 40 0.25 110
YEJ132S1-2 5.5 7.5 2900 11.10  85.5 0.88 75 0.25 130
YEJ132S2-2 7.5 10.0  2900 15.00  86.2 0.88 75 0.25 130
YEJ160M1-2 11 15 2930 21.80  87.2 0.88 150 0.35 150
YEJ160M2-2 15 20 2930 29.40  88.2 0.88 150 0.35 150
YEJ160L-2 18.5 25 2930 35.50  89.0  0.89 150 0.35 150
YEJ180M-2 22 30 2940 42.20  89.0  0.89 200 0.35 150
YEJ200L1-2 30 40 2950 56.90  90.0  0.89 300 0.45 200
YEJ200L2-2 37 50 2950 69.80  90.5 0.89 300 0.45 200
YEJ225M-2 45 60 2960 83.90  91.5 0.89 450 0.45 200
                   
Technical data-YEJ series motor-4 poles -380v/50HZ
Type Rated output Full Load Static braking torque Max.braking time at No-load Brake power
Speed Input Current Efficiency Power factor
KW HP RPM Amp Eff.% P.F N.m S W
YEJ80M1-4 0.55 0.75 1390 1.51 73.0  0.76 7.5 0.20  50
YEJ80M2-4 0.75 1.0  1390 2.01 74.5 0.76 7.5 0.20  50
YEJ90S-4 1.1 1.5 1400 2.75 78.0  0.78 15 0.20  60
YEJ90L-4 1.5 2.0  1400 3.65 79.0  0.79 15 0.20  60
YEJ100L1-4 2.2 3.0  1420 5.03 81.0  0.82 30 0.20  80
JET100L2-4 3.0  4.0  1420 6.82 82.5 0.81 30 0.20  80
YEJ112M-4 4.0  5.5 1440 8.77 84.5 0.82 40 0.25 110
YEJ132S-4 5.5 7.5 1440 11.60  85.5 0.84 75 0.25 130
YEJ132M-4 7.5 10.0  1440 15.40  87.0  0.85 75 0.25 130
YEJ160M-4 11 15 1460 22.60  88.0  0.84 150 0.35 150
YEJ160L-4 15 20 1460 30.30  88.5 0.85 150 0.35 150
YEJ180M-4 18.5 25 1465 35.90  91.0  0.86 200 0.35 150
YEJ180L-4 22 30 1465 42.50  91.5 0.86 200 0.35 150
YEJ200L-4 30 40 1470 56.80  92.2 0.87 300 0.45 200
YEJ225S-4 37 50 1475 70.40  91.8 0.87 450 0.45 200
YEJ225M-4 45 60 1475 84.20  92.3 0.88 450 0.45 200
                   
Technical data-YEJ series motor-6 poles -380v/50HZ
Type Rated output Full Load Static braking torque Max.braking time at No-load Brake power
Speed Input Current Efficiency Power factor
KW HP RPM Amp Eff.% P.F N.m S W
YEJ90S-6 0.75 1.0  910 2.25 72.5 0.7 15 0.2 60
YEJ90L-6 1.1 1.5 910 3.16 73.5 0.72 15 0.2 60
YEJ100L-6 1.5 2.0  930 3.97 77.5 0.74 30 0.2 80
YEJ112M-6 2.2 3.0  940 5.61 80.5 0.74 40 0.25 110
YEJ132S-6 3.0  4.0  960 7.23 83.0  0.76 75 0.25 130
YEJ132M1-6 4.0  5.5 960 9.40  84.0  0.77 75 0.25 130
YEJ132M2-6 5.5 7.5 960 12.60  85.3 0.78 75 0.25 130
YEJ160M-6 7.5 10.0  970 17.00  86.0  0.78 150 0.35 150
YEJ160L-6 11 15 970 24.60  87.0  0.78 150 0.35 150
YEJ180L-6 15 20 970 31.40  89.5 0.81 200 0.35 150
YEJ200L1-6 18.5 25 975 37.70  89.8 0.83 300 0.45 200
YEJ200L2-6 22 30 975 44.60  90.2 0.83 300 0.45 200
YEJ225M-6 30 40 980 59.50  92.2 0.85 450 0.45 200

Detailed Photos

Our Advantages

We have more than 30years on all kinds of ac motors and gearmotor ,worm reducers producing ,nice price 
What we do:
1.Stamping of lamination
2.Rotor die-casting
3.Winding and inserting – both manual and semi-automatically
4.Vacuum varnishing
5.Machining shaft, housing, end shields, etc…
6.Rotor balancing
7.Painting – both wet paint and powder coating
8.assembly
9.Packing
10.Inspecting spare parts every processing
11.100% test after each process and final test before packing.,
 

FAQ

Q: Do you offer OEM service?
A: Yes
Q: What is your payment term?
A: 30% T/T in advance, 70% balance when receiving B/L copy. Or irrevocable L/C.
Q: What is your lead time?
A: About 30 days after receiving deposit or original L/C.
Q: What certifiicates do you have?
A: We have CE, ISO. And we can apply for specific certificate for different country such as SONCAP for Nigeria, COI for Iran, SASO for Saudi Arabia, etc.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industrial ,Universal ,etc
Speed: Constant Speed
Number of Stator: Three-Phase
Function: Control
Casing Protection: Protection Type
Number of Poles: 2.4.6.8p
Samples:
US$ 246/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

dc motor

What is a DC motor, and how does it differ from other types of electric motors?

A DC (Direct Current) motor is an electric motor that converts electrical energy into mechanical motion. It operates based on the principle of electromagnetic induction and the interaction between current-carrying conductors and magnetic fields. DC motors are widely used in various applications due to their simplicity, controllability, and versatility. Here’s a detailed explanation of what a DC motor is and how it differs from other types of electric motors:

1. Basic Operation:

In a DC motor, electrical energy is supplied to the motor’s armature through a DC power source, typically a battery or a rectified power supply. The armature consists of multiple coils or windings that are evenly spaced around the motor’s rotor. The rotor is a cylindrical core with a shaft that rotates when the motor is energized. When current flows through the armature windings, it creates a magnetic field that interacts with the fixed magnetic field produced by the motor’s stator. This interaction generates a torque, causing the rotor to rotate.

2. Commutation:

DC motors employ a commutator and brushes for the conversion of electrical energy and the rotation of the rotor. The commutator consists of a segmented cylindrical ring attached to the rotor shaft, and the brushes are stationary conductive contacts that make contact with the commutator segments. As the rotor spins, the brushes maintain contact with the commutator segments, periodically reversing the direction of the current flow in the armature windings. This reversal of current flow in the armature windings ensures continuous rotation of the rotor in the same direction.

3. Types of DC Motors:

DC motors can be classified into different types based on their construction and the method of field excitation. The two main types are:

  • Brushed DC Motors: Brushed DC motors have a mechanical commutator and brushes to switch the current direction in the armature windings. These motors are relatively simple, cost-effective, and offer good torque characteristics. However, the commutator and brushes require regular maintenance and can generate electrical noise and brush wear debris.
  • Brushless DC Motors (BLDC): Brushless DC motors, also known as electronically commutated motors (ECMs), use electronic circuits and sensors to control the current flow in the motor windings. They eliminate the need for brushes and commutators, resulting in reduced maintenance and improved reliability. BLDC motors offer higher efficiency, smoother operation, and better speed control compared to brushed DC motors.

4. Speed Control:

DC motors provide excellent speed control capabilities. By adjusting the voltage applied to the motor, the speed of the DC motor can be regulated. Lowering the voltage reduces the motor’s speed, while increasing the voltage increases the speed. This feature makes DC motors suitable for applications that require precise speed control, such as robotics, conveyor systems, and electric vehicles.

5. Advantages and Disadvantages:

DC motors have several advantages, including:

  • Simple construction and easy maintenance (for brushed DC motors).
  • High starting torque.
  • Precise speed control.
  • Good controllability over a wide range of loads.

However, DC motors also have some limitations, such as:

  • Brushed DC motors require periodic maintenance and have limited brush life.
  • Brushed DC motors can generate electrical noise.
  • Brushless DC motors are often more expensive compared to brushed DC motors.

6. Differences from Other Electric Motors:

DC motors differ from other types of electric motors, such as AC (Alternating Current) motors, in several ways:

  • Power Source: DC motors require a DC power source, while AC motors operate from an AC power supply.
  • Speed Control: DC motors offer precise speed control by adjusting the applied voltage, whereas AC motors typically rely on frequency control for speed regulation.
  • Construction: DC motors use a commutator and brushes (in brushed DC motors) or electronic commutation (in brushless DC motors), while AC motors do not require commutation.
  • Starting Torque: DC motors typically provide higher starting torque compared to AC motors.

Overall, DC motors are versatile and widely used in various applications due to their controllability, speed regulation capabilities, and simplicity. The advancements inpower electronics and motor control technologies have further enhanced the performance and efficiency of DC motors, making them a popular choice in many industries.

dc motor

Are there specific types of DC motors designed for different industries or applications?

Yes, there are specific types of DC (Direct Current) motors that are designed and optimized for various industries and applications. DC motors offer a wide range of performance characteristics, allowing them to be tailored to specific requirements. Here’s a detailed explanation of the types of DC motors designed for different industries or applications:

1. Brushed DC Motors:

Brushed DC motors are commonly used in applications that require simple and cost-effective motor solutions. They are suitable for applications with lower efficiency requirements and where maintenance considerations are manageable. Some common industries and applications that use brushed DC motors include:

  • Automotive: Power window mechanisms, windshield wipers, cooling fans, and seat adjustment systems.
  • Consumer Electronics: Household appliances, toys, power tools, and personal care devices.
  • Industrial Machinery: Conveyors, pumps, fans, and machine tools.

2. Brushless DC Motors:

Brushless DC motors are known for their higher efficiency, greater reliability, and precise control capabilities. They are widely used in industries and applications that demand higher performance and advanced control features. Some specific industries and applications that utilize brushless DC motors include:

  • Automotive: Electric power steering systems, electric vehicles, hybrid vehicles, and HVAC systems.
  • Aerospace and Defense: Actuators, robotics, unmanned aerial vehicles (UAVs), and missile systems.
  • Medical and Laboratory Equipment: Centrifuges, pumps, robotics, and diagnostic devices.
  • Industrial Automation: CNC machines, robotics, automated guided vehicles (AGVs), and precision motion control systems.
  • Renewable Energy: Wind turbine generators, solar tracking systems, and energy storage systems.

3. High-Torque DC Motors:

High-torque DC motors are designed to provide substantial torque output at low speeds. They are commonly used in applications that require heavy lifting or high starting torque. Industries and applications that often utilize high-torque DC motors include:

  • Material Handling: Cranes, hoists, winches, lifts, and elevators.
  • Construction and Mining: Excavators, bulldozers, drilling rigs, and conveyor systems.
  • Automotive: Electric vehicles, electric powertrains, and traction control systems.
  • Marine and Shipbuilding: Thrusters, winches, and anchor handling systems.

4. Low-Voltage DC Motors:

Low-voltage DC motors are designed to operate at lower voltages, typically below 24 volts. They are commonly used in battery-powered applications and systems where safety or specific voltage requirements exist. Some industries and applications that utilize low-voltage DC motors include:

  • Automotive: Automotive accessories, window actuators, and door locks.
  • Robotics and Hobbyist Projects: DIY robots, RC vehicles, and model trains.
  • Solar Power Systems: Solar tracking systems, solar panel actuators, and solar-powered water pumps.
  • Home Automation: Automated blinds, curtains, and smart home devices.

These are just a few examples of the types of DC motors designed for different industries and applications. The versatility and adaptability of DC motors make them suitable for a wide range of uses, and manufacturers often offer customized motor solutions to meet specific requirements.

dc motor

Are there safety considerations or maintenance practices associated with DC motors?

Yes, there are safety considerations and maintenance practices associated with DC (Direct Current) motors. DC motors, like any other electrical equipment, require proper handling, maintenance, and adherence to safety guidelines to ensure safe operation and longevity. Here’s a detailed explanation of the safety considerations and maintenance practices associated with DC motors:

Safety Considerations:

Electrical Hazards: DC motors operate with high voltages and currents, posing electrical hazards. It is essential to follow proper electrical safety practices, such as wearing appropriate personal protective equipment (PPE) and ensuring that electrical connections are secure and insulated. Proper grounding and isolation techniques should be employed to prevent electrical shocks and accidents.

Lockout/Tagout: DC motors, especially in industrial settings, may require maintenance or repair work. It is crucial to implement lockout/tagout procedures to isolate the motor from its power source before performing any maintenance or servicing activities. This ensures that the motor cannot be accidentally energized during work, preventing potential injuries or accidents.

Overheating and Ventilation: DC motors can generate heat during operation. Adequate ventilation and cooling measures should be implemented to prevent overheating, as excessive heat can lead to motor damage or fire hazards. Proper airflow and ventilation around the motor should be maintained, and any obstructions or debris should be cleared.

Mechanical Hazards: DC motors often have rotating parts and shafts. Safety guards or enclosures should be installed to prevent accidental contact with moving components, mitigating the risk of injuries. Operators and maintenance personnel should be trained to handle motors safely and avoid placing their hands or clothing near rotating parts while the motor is running.

Maintenance Practices:

Cleaning and Inspection: Regular cleaning and inspection of DC motors are essential for their proper functioning. Accumulated dirt, dust, or debris should be removed from the motor’s exterior and internal components. Visual inspections should be carried out to check for any signs of wear, damage, loose connections, or overheating. Bearings, if applicable, should be inspected and lubricated as per the manufacturer’s recommendations.

Brush Maintenance: DC motors that use brushes for commutation require regular inspection and maintenance of the brushes. The brushes should be checked for wear, proper alignment, and smooth operation. Worn-out brushes should be replaced to ensure efficient motor performance. Brush holders and springs should also be inspected and cleaned as necessary.

Electrical Connections: The electrical connections of DC motors should be periodically checked to ensure they are tight, secure, and free from corrosion. Loose or damaged connections can lead to voltage drops, overheating, and poor motor performance. Any issues with the connections should be addressed promptly to maintain safe and reliable operation.

Insulation Testing: Insulation resistance testing should be performed periodically to assess the condition of the motor’s insulation system. This helps identify any insulation breakdown or degradation, which can lead to electrical faults or motor failures. Insulation resistance testing should be conducted following appropriate safety procedures and using suitable testing equipment.

Alignment and Balance: Proper alignment and balance of DC motors are crucial for their smooth operation and longevity. Misalignment or imbalance can result in increased vibrations, excessive wear on bearings, and reduced motor efficiency. Regular checks and adjustments should be made to ensure the motor is correctly aligned and balanced as per the manufacturer’s specifications.

Manufacturer’s Recommendations: It is important to refer to the manufacturer’s guidelines and recommendations for specific maintenance practices and intervals. Each DC motor model may have unique requirements, and following the manufacturer’s instructions ensures that maintenance is carried out correctly and in accordance with the motor’s design and specifications.

By adhering to safety considerations and implementing proper maintenance practices, DC motors can operate safely, reliably, and efficiently throughout their service life.

China supplier Yej Series 5.5kw Three-Phase Asynchronous Motors for Braking AC Motors with DC Brakes   with Best Sales China supplier Yej Series 5.5kw Three-Phase Asynchronous Motors for Braking AC Motors with DC Brakes   with Best Sales
editor by CX 2024-04-25

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *