Material Dealing with Energy UNIT 2
This power unit features electrical power up gravity down circuit. Activate the commence solenoid to begin the motor to lift the machine. The lowing motion is activated from the solenoid valve using the decreasing velocity controlled from the stress compensated flow handle valve. Products of this series can be extensively used in the sector of logistic gadgets including fork lift, mini lift table, and so forth.
one. The duty of this energy unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean all the hydraulic components concerned before mounting the electrical power unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst,which must also be clean and absolutely free of impurities, N46 hydraulic oil is recommended .
four. Oil changing is needed right after the original 100 operation hrs,afterwards once every 3000 hours.
5. The electrical power unit need to be mounted horizontally.
Materials Managing Electrical power UNIT 1
This energy unit is developed for your fork lift market, consisting of remarkably productive gear pump, DC motor, guide increase and lower valve, tank, ect. The up and down motion are controlled by the lever with the guide release valve, which is outfitted with an electrical switch to activate the motor. The lowing speed is managed from the strain compensated flow manage valve.
1. The duty of this energy unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean the many hydraulic components concerned ahead of installation of the electrical power unit.
three. Viscosity with the hydraulic oil shoud be 15~46 cst, which should also be clean and absolutely free of impurities, N46 hydraulic oil is suggested .
four. Oil changing is required following the preliminary a hundred operation hours, afterwards once every 3000 hours.
five. The electrical power unit shown is made to be mounted horizontally.