O-Ring Chain (LD)/X-Ring Chain (LX)

Highest wear resistance available by sealing grease among pins and bushings
The durability of chain is substantially improved given that grease is sealed amongst the pins and bushings by O-rings. The O-ring chain would be the most reliable model of the Ultimate Existence Chain Series with its exceptional dress in resistance even within the conditions or environments the place chain servicing is tough.
Advised employs.
?Conditions the place frequent chain replacement is required because of put on stretch
?Circumstances where lubrication during the services is impossible
?In an environment with significantly soil, sand, dust, etc.
?Applications that need strength larger than that of a sintered bushing roller chain
Other capabilities
?Minimizing noise. (The noise level is 3 dB reduced compared to regular roller chains.)
?Lowering vibration with all the friction produced by O-Ring. (The power loss due to the friction is nearly negligible, because the frictional force between the pins and bushings is for normally during the applications.)
Collection of chains
The power of an O-ring chain is almost the identical as that of a regular roller chain. (Since the pins are longer than individuals of normal roller chain, the common rupture power is somewhat decrease.)
For picking out a suitable chain, refer to “Selection of Chains” .
When the services ambient temperature is increased than 80° C, distinctive heat resistant O-rings must be employed. In this case, speak to us for extra data.
Connecting backlinks and offset links
Two kinds of connecting links can be found: clearance match and interference match. When large power or durability is required, use interference-fit connecting hyperlink. Only 2POJ is obtainable because the offset link for all sizes.
Sprockets
O-ring chain utilizes longer pins than a common roller chain. When employing multiplex O-ring chain, the normal sprocket for multiplex chains can’t be utilised.
Caution
O-ring chain is not encouraged in applications the place solvents or other substances could assault “Nitric Rubber”. Exclusive materials O-rings may also be out there for these problems: Please check with us for particulars. In general, “Nitric Rubber” is broken by contact using the following chemical resources.