Equipment Containers For Rotary Cutter’s, Shredders, and Choppers
RC 30 Sequence Gearbox, 40hp Rated, 1-three/eight” SB enter, 1-1/2″ X twelve Spline Output. 1:1.47 Ratio Change your broken rotary cutter gearbox with this substitute device. Why rebuild when you can exchange at this kind of a minimal price tag? These gearboxes have been utilized by Worksaver, HawkLine, Global, WAC, Large Bee, LMC, King Kutter, Midwest, Servis, Bush Hog, some Howse and a lot of more. Notice: Actual Gearbox might have a rounded housing or square as demonstrated, depending on existing availability, all inner elements are interchangeable and requirements for the two packing containers are identical! This gearbox attributes a one:one.forty seven Speed Up gear ratio for use on 5′ and greater diameter rotary cutters. Sector regular one-three/8″ sleek diameter input shaft with 1/2″ shear bolt hole and retaining ring groove and 1.57″ diameter 12 tapered spline output shaft permit fitment to most gentle, standard and medium duty rotary cutters. Each and every gearbox attributes higher speed ball bearing models and heat dealt with gears and shafts to guarantee lengthy life. 4 bolt mounting matches business requirements. Each and every gearbox contains blade carrier mounting nut and cotter pin. Gearboxes are delivered dry and require 16 ounces of eighty-90W gearlube or equal. Disclaimer: Any and all Original Tools Manufacturer’s (OEM) tradenames, trademarks, drawings, shades, descriptive information and component figures are utilized for components identification functions only, and DN Tools, LLC (DN) is in no way implying that any certain areas are OEM elements. Even more, any use of the OEM’s tradenames, logos, drawings or portion numbers by DN is developed only to help DN’s buyers, in getting the proper DN element or component which will exchange the OEM’s part.
rotary cutter gearbox