worm motor

Worm travel gearbox with motor
worm motor
A robust worm-get gearbox powered by an MM28 motor. Ideal applications where a simple to fit, high torque end result is required. Great for student based assignments including robots and buggies.
The machine has been designed to ensure that the output shaft could be ‘clicked’ in and out for modification. Electronic.g. reducing to size. The motor is snap fitted into its cradle to activate the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + engine: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the electric motor isn’t turning. The high equipment ratios of 216:1 or 336:1 get this to gearbox appropriate for small walking robots, lifting mechanisms, and other applications where excessive torque is desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draft to some amps, making them ideal candidates for the DRV8833 motor driver carrier. Engine overheating can be due to excessive stalling, also at very low voltages. We recommend that you utilize stall-detection sensors, or simply see your robot, to make sure that it doesn’t stall for lots of seconds at a time.
This gearbox has a 4 mm diameter, round output shaft, which works with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also matches on small threaded end of the shaft, although it is not especially designed to work with this kind of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors will be economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct angle worm geared motors set new criteria for reliability, efficiency and economic climate with unparalleled features including hollow shafts in the tiniest sizes. An inverter friendly style offers easy integration today and a future proof alternative. The Ever-Power gear electric motor offers total flexibility in mounting choices includes shaft, base, face, and flange solutions. The motor terminal box can be mounted in substitute positions rotated in 90º steps around the electric motor frame providing for unparalleled integration possibilities.
Ever-Power gear motors comply with UNITED STATES and International requirements, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a true total alternative for our global customers.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose proof,and can be utilized outside or in wet and dusty conditions without the use of additional enclosures. Complete rated output is offered by the result shaft of the machine.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Connect connectors.
With included inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the solution for applications requiring a good part turn, optional dual output, or perhaps an inability for the electric motor to be back driven. The DC right angle equipment motors are made for constant and intermittent duty operation. Our right angle equipment reducers are designed with a number of mounting plate choices, making them perfect for a number of DC engine based applications. You can expect 12 ratios ranging from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ time (varies by application)
EP Products Worm Equipment Motors are designed to generate high torque in a small package size. Worm Equipment Motors are excellent for applications that require a personal- locking or breaking feature since the result shaft can’t rotate when there’s no power used. Additionally, Worm Gearheads can transfer motion in 90 degrees. With various reduction ratios, precision lower gears, voltages and sizes, EP Items includes a DC Worm Gear Motor solution for the application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Equipment Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Protection Door Locks / Industrial Conveying Systems / Security Gates / Dental Chairs / Ambulance Cots & Stretchers Many of our DC Motors can be complimented with one of our Worm Gearheads. EP Items will continue to work with you to create and produce a Worm Gear Electric motor which will optimize the performance of your specific application.
Built to your specific requirements
Motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Trim / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm engine uses a metal gear box for durability and a high torque output. Due to the special mechanical structure of the worm travel the engine output shaft is certainly self locking and can not be rotated.
This part runs on the two wire connection and supports direction control along with PWM speed control. Rated voltage is 12v and can attain 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear systems from EP DRIVESYSTEMS especially show their power in applications where superior gear ratios are necessary. Our worm geared motors happen to be therefore optimally suited for use in intralogistics, packaging technology and the food & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a higher overload capacity
Maintenance Friendly
Washdown versions enable simple and effective cleaning of the travel system.
Corrosion protection
The NSD tupH sealed surface conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Flexibility
Our modular design give users maximum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are many applications that want drive systems, and each of these has its own unique requirements. The EP series worm equipment motors could be quickly and efficiently adapted to fulfill your needs.
Worm gear products impress with their superior power density and small design. If required, we can also source them with the highly effective nsd tupH surface area treatment.
In addition to the basic EP housing, we offer an extensive type of bolt-on components to customize the product including torque arms, shaft covers and output flanges. These can be easily field set up, but we will also be happy to assemble the individual components for you.
Find out more about the modular SI worm geared motors!
Find out more
Smooth and Clean: The EP worm gear unit SMI
SMI worm gear products feature a clean, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface area conversion makes the product ideally suited for severe and demanding industries like food processing and pharmaceuticals.
Versatile input designs such as for example NEMA, IEC or immediate motor mounts in extra foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared electric motor program. The units have on all sides unique fixing possibilities and enable a simple assembling for the customer.
Various other drive configurationscan be designed by use of built-in add-ons (e.g. torque arm and result flanges). The housings are created in light weight structure out of aluminium die cast. Motor attachment is realised in general by way of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Buy Worm Travel Gearbox with Engine – incorporating the next features: 1 to 6V voltage ranking, 17100 rpm simply no load swiftness, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm large, 40mm high, a robust worm travel gearbox powered by an MM28 engine (included), most ideal for applications where a simple to match, high torque result is required, nylon housing and equipment, requires light oil or perhaps silicon grease lubrication, perfect for student based projects including robots and buggies.
Most ideal for applications where a simple to match, high torque end result is required
Perfect for student based projects including robots and buggies
Reversible High torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Reversible Great torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Features:
The electric motor is Gear DC engine with micro-turbine worm, you can change the wiring-connection to improve motor rotation.
Turbo worm geared electric motor with self-lock, that’s, regarding motor without electric, the result axis is certainly fixed, self-lock.
The reducer output shaft arranged vertically with the motor shaft, whole motor output shaft relatively-short than general gear electric motor, widely used to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Result torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the windows, door, Mini winch. Ect.
In sumo robot or combat robot competition where excessive holding torque’s electric motor is essential in order to avoid your robot being pushed by your opponent robot. The worm equipment is definitely a much better option when compared to spur gear motor. How come worm gear so special? Take a look wiki out: Worm Drive.
“Unlike with ordinary gear trains, the direction of transmission (input shaft vs result shaft) isn’t reversible when using large reduction ratios, due to the higher friction involved between your worm and worm-wheel, when usually a single start (a single spiral) worm is used. This can often be a advantage when it is desired to get rid of any probability of the output driving the input.”
In other phrases, it is tough to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g

Are you throwing away time seeking worm motor on various other internet sites?