Z4 Series DC Motor 440V Electric Motor

Z4 Series DC Motor 440V Electric Motor

Solution Description:
 
DC motor is a rotating motor that can change DC electric power into mechanical strength (DC motor) or mechanical power into DC electrical vitality (DC generator). It is a motor that can change DC and mechanical vitality into 1 another. When it operates as a motor, it is a direct current motor, which converts electrical strength into mechanical strength when it operates as a generator, it is a immediate existing generator, which converts mechanical strength into electrical energy.
 

Solution Identify Z4 sequence DC Motor 440V electric Motor
Motor Type DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT equipment)
Composition framework The structure of DC motor ought to consist of two components: stator and rotor. The static portion of DC motor is named stator. The primary perform of stator is to generate magnetic field, which is composed of foundation, main magnetic pole, commutation pole, end cap, bearing and brush gadget. Running element is referred to as rotor, whose primary operate is to create electromagnetic torque and inductive electromotive force. It is the hub of strength conversion of DC motor. So it is also frequently called armature, which is composed of rotor, armature core, armature winding, commutator and admirer.
Model Z Variety
Seat amount Z315-Z1000
energy sixty~2800kW
Voltage 220~1000V
Torque selection 1.five ~180kNm
Safety degree IP23, IP44
Cooling method IC06,IC17,IC37,IC81W
Operating pace  Constant Velocity /Minimal Pace /Modify Speed /High Speed Other 
Main classification DC Motor is a device that converts mechanical vitality into DC power. It is largely used as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation electrical power supply of alternator. Although in locations the place DC electricity is necessary, AC electricity rectifier is also utilized to transform AC into DC electricity, but from some factors of efficiency, AC rectifier energy offer can not fully change DC generator.  
Application DC motors are broadly used in tape recorders, video clip recorders, video discs, electric powered shavers, hair dryers, electronic watches, toys and so on.
Routine maintenance approach Professional motor routine maintenance center motor upkeep process: cleaning stator and rotor – replacing carbon brush or other parts – vacuum F strain dipping paint – drying – Calibration balance.
one. Use atmosphere ought to be usually dry, motor surface area should be held thoroughly clean, air consumption ought to not be hindered by dust, fibers and other obstructions.
2. When the thermal security of the motor carries on to function, it should be ascertained no matter whether the fault arrives from the motor or the overload or the environment value of the protective device is way too reduced. Soon after eliminating the fault, it can be put into procedure.
three, make certain that the motor is effectively lubricated throughout operation. The common motor runs for about 5000 several hours, that is to say, lubricating grease must be extra or replaced. When bearing overheating or lubricating deterioration is identified in operation, the hydraulic strain must alter lubricating grease in time. When changing grease, the aged grease ought to be removed, and the oil groove of bearing and bearing go over must be washed with gasoline. Then ZL-three lithium grease should be filled with 1/2 (two poles) and 2/3 (4 poles, 6 poles and eight poles) of the cavity in between the interior and outer rings of the bearing.
4. When the lifestyle of the bearing is in excess of, the vibration and noise of the motor will increase naturally. When the radial clearance of the bearing reaches the pursuing worth, the bearing need to be replaced.
5, when taking away the motor, it is Alright to take away the rotor from the shaft extension or the non extension end. If it is not needed to unload the enthusiast, it is a lot more convenient to just take out the rotor from the non-axle extension stop. When pulling out the rotor from the stator, the stator winding or insulation need to be prevented from being broken.
6. When changing the windings, the sort, size, turns and gauges of the authentic windings should be recorded. When these knowledge are dropped, they must be attained from the producer and the unique designed windings should be altered at will, which frequently deteriorates 1 or several functionality of the motor or even makes it impossible to use them.

 

 

Z4 Series DC Motor 440V Electric Motor